Weathervane Mounting Information

NOTE: Roof mounts are not included and must be ordered separately.

Our weathervanes are made "cupola-ready". If you plan to mount your weathervane directly on a roof, or against a wall, or under an eave, you will need to purchase a mounting bracket. We also offer garden poles, interior wall brackets, desk and floor mounts.

USING A BRACKET OR ROOF MOUNT:

1.) Position roof mount in needed location and mark where the holes should be drilled. Drill the holes. With a good quality silicone caulk, seal between the roof mount and the roof.

Check that the roof mount is plumb, then insert screws.

2.) With a hacksaw, cut the post so that it is not more than 16" above the roof mount. Insert the post into the roof mount.

3.) Refer to weathervane assembly instructions to complete installation.